The Kid's dental unit, which is used by dentists every day, will encounter various problems during use. However, each device has a prescribed operating procedure, and sometimes it is found that improper use will cause equipment failure, so it must be maintained in advance. Therefore, the Kid's dental unit manufacturer stated that users should use the Kid's dental unit correctly in accordance with regulations to reduce Kid's dental unit failures. The following Kid's dental unit manufacturers talk about the problems and precautions in the use of Kid's dental unit.

Precautions for using Kid's dental unit:
1. Immediately after get off work, turn off the main switch on the dashboard, and cut off the electricity, gas and water supply of the equipment (including the dental chair).
2. If the equipment is not used for a long time, the user's water, gas and power supply should be cut off, and the residual water and gas in the equipment should be cleaned.
3. The power supply needs to have a reliable grounding wire.
The Kid's dental unit manufacturer reminds everyone to cut off the power of the whole unit before maintenance.
1. Cleaning: It is recommended to use household detergent as a cleaning agent to clean the outer surface of the equipment. It is recommended to scrub with medical alcohol solution or new cleaning solution for frequently touched parts.
2. The nozzle of the spray gun is recommended to be disinfected under high temperature and high pressure, and the spittoon should be scrubbed with a soft brush regularly to keep the spittoon clean.
3. Maintenance of the filter: Regularly (recommended three months) clean the air filter at the dental chair; drain the accumulated water in the air filter every half a month to prevent the accumulated water from entering the air circuit and affecting the normal use of the machine: Loosen the screw at the bottom of the cup clockwise, the accumulated water in the cup can be flushed out, and then tighten the screw at the bottom of the cup counterclockwise. Clean the water filter at the dental chair regularly (recommended three months), remove the mounting screws, remove the nut at the bottom of the cup, unscrew the cup body, take out the filter element, and clean all parts. After cleaning, install and tighten them to ensure reliable sealing and use. The micro-water filter should be cleaned regularly (one month is recommended). After unscrewing the microfiltration valve body, take out the filter screen, clean it, and put it back in place.
4. Dental light: Please wipe the lens of the dental light with lens tissue or absorbent cotton. Alcohol wipes or other solvents are not allowed.
5. The Kid's dental unit should not be started and reversed frequently, so as not to affect the life of the motor.
6. Always check whether the sheath of the power cord is damaged and whether the contact of the power plug is good. If there is a hidden danger, it should be replaced by professional maintenance personnel.
7. It is recommended that the professional maintenance personnel of the hospital conduct an electrical inspection every six months, specifically to check whether the leakage current and the protective ground connection meet the requirements.
8. It is recommended to dispose of scrapped parts and complete machines according to local laws and regulations.
Kid's dental unit integrates elements of air, water and electricity during oral treatment. During the design process, the manufacturer of Kid's dental unit drew on the design experience of previous products, and referred to the design schemes of advanced products at home and abroad, and determined the design concept based on convenience, usability and reliability. Kid's dental unit adopts ergonomic principles and provides a good space for children.