Dental unit chair manufacturers tell you that dental equipment is our dentist’s most important asset. Dental unit chair manufacturers tell you that if it often fails, it will not only cause a lot of inconvenience to our work, but also greatly increase the cost of use. We understand some The maintenance knowledge of dental equipment will not only greatly improve work efficiency, but also greatly reduce our use costs. The following dental unit chair manufacturers briefly introduce the maintenance of various commonly used dental equipment.

1. Dental handpiece
The dental unit chair manufacturer tells you to drip a drop of mobile phone lubricant from the air inlet of the mobile phone every day before opening a consultation, and then turn the mobile phone on the comprehensive treatment table to make the lubricant enter the movement. Open the back cover of the mobile phone every month, Take out the movement, clean it with absolute alcohol, dry it and add oil.
2. Comprehensive treatment table
The dental unit chair manufacturer tells you to adjust the output air pressure of its various heads. Excessive pressure will shorten the service life of the mobile phone. The air pressure required for high-speed mobile phones is 2.0-2.2 kg, and low-speed mobile phones are 2.5-2.8. Monthly air and water The filter is cleaned once to prevent air and dirt from clogging the pipeline.
3. Air pump
The dental unit chair manufacturer tells you to adjust the output pressure of the air pump to 5-6 kg. Excessive pressure may cause the trachea of ​​the treatment table to rupture. Empty the water in the air tank once a week to prevent the water from occupying the space of the air tank. Frequent startup of the air pump. The dental unit chair manufacturer tells you to look at the oil viewing window every month. If the oil level is lower than the midline, you need to add pump oil. In order to avoid the lack of oil and cause the machine to crash.