LED Cold light whitening machine (luxury cart type) is suitable for treating the following stained teeth:
1. Extrinsic pigments sticky teeth (smoke stains, coffee stains, tea stains, etc.);

2. Intrinsic pigmented teeth, moderate to mild tetracycline teeth, fluorosis teeth;
3. Hereditary yellow teeth;
4. Most of the teeth are yellow and black due to unknown reasons.
LED Cold light whitening machine (luxury cart type) whitening process:
1. Before the operation starts, the dentist will perform oral examination and communicate with whitening patients. People under 16 years old, pregnant women and severe periodontal patients will not be suitable for this type of tooth whitening.
2. Compare and record the color of the teeth before whitening, which can be illuminated and archived.
3. Mix the polished sand with a small amount of water, and simply treat the surface of the tooth. After the treatment is completed, let the patient rinse the mouth, be sure to dry the surface of the teeth.
4. Put the mouth opener into the patient's mouth and make sure that the patient has no discomfort.
5. Put the moisture barrier tampon inside the lips, apply lip care oil, and wear a masking tissue.
6. Apply the gum protector on the gums, with a thickness of about 2-4mm, and cover 0.5mm below the gums. The whitening patient and the operator put on goggles and use a light curing machine to cure the gum protectant.
7. Adjust the hydrogen peroxide and whitening powder into a paste (note: the consistency is subject to the whitening agent not dripping with a brush, not too thick).
8. Apply the adjusted whitening agent to the surface of 16 or more teeth that have been blown dry, with a thickness of about 2-3mm.
9. Adjust the LED Cold light whitening machine (luxury cart type) lamp holder, the lamp holder should be 90 degrees perpendicular to the tooth surface, and it is advisable to just touch the locator to the cheek. Choose the appropriate time and mode according to your needs and prepare for irradiation. (During the irradiation, if the patient reports that the teeth are sensitive or painful, the whitening operation should be stopped.
10. It is recommended to set the duration of a course of treatment to 10 minutes or 15 minutes. Press the START button to start the first treatment. After the end, the LED Cold light whitening machine (luxury cart type) will automatically stop, and then use a strong straw to suck off the whitening agent on the tooth surface. If necessary, use a dry cotton ball to wipe the residue on the teeth Whitening agent, do not rinse with water at this time.
Use LED Cold light whitening machine (luxury cart type) Note: What you need to pay attention to here is the "sucking method" instead of washing with water. Be careful, after the final operation, do not rinse with water, just rinse with mouthwash by the patient. Different brands of LED Cold light whitening machine (luxury cart type) may have different operating methods. Please follow the instructions of LED Cold light whitening machine (luxury cart type) for specific operating methods.